International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064

Downloads: 123 | Views: 216

Research Paper | Agricultural Engineering | Nigeria | Volume 8 Issue 1, January 2019

Performance Evaluation of a Push Type Cassava Harvester

Egbe-Okpenge I. S | Gbabo A.

Abstract: Cassava harvesting is regarded as the most laborious operation in its production, involving three main sequential operations from stem cutting, soil loosening and then uprooting of the tubers. Relevant properties soil, stem and tuber were determined in evaluating the performance of the cassava harvest. Some of such properties being moisture content were investigated for the soil and stem of cassava in determining the harvesters cutting efficiency, soil loosening and uprooting efficiencies. Soil moisture tests revealed that at harvest, 10 MAP (months after planting), unconditioned (class-C) soil moisture was between 1.5 and 3 %, while on conditioning with specific quantities of water (5 10 litres), under class A and B treatments, revealed the soils moisture to between 17 20 % and 10 12 % respectively. Mean soil moisture content on d. b was evaluated for Class A, B and C treatments as 18.7 %, 10.8 % and 1.94 % respectively. Moisture in the stem was also determined from fifty randomly selected stalk samples and found to be between 45.84 81.02 %, with a mean of 68.97 %. Other properties comprise of mean tuber spread 44.83 cm, mean tuber yield per plant 4.86kg, while average root tuber depth was 16.59 cm. Diameter of stems ranged from 2.08 cm 4.31 cm with an average of 2.82 cm. Mean cutting efficiency was 48.72 %. Optimisation design revealed optimum cutting efficiency as 97.664 %, at a moisture content of 70 85 %, lever arm length of 65 cm, region of cut above ground surface 30 cm and at 4 cutting attempts. Soil loosening efficiency ranged from 52.22 100 %, with a mean efficiency of 82.952 %. Optimisation analysis revealed an optimum soil loosening efficiency for LED and LET as 96.31 % and 93.74 % at soil moisture of 17 20 %, lever arm length of 100 cm and loosened depth of 3 cm respectively. Uprooting efficiency ranged from 63.03 100 % with a mean uprooting efficiency of 77.706 %. Optimum uprooting efficiency was 96.678 %, observed at the highest soil moisture range of 17-20 % and at a lever length of 105 cm. ANOVA test results revealed the effect of moisture content on the stems cutting efficiency, soil loosening efficiency and uprooting efficiency of the harvester, significant at p

Keywords: Performance, Evaluation, Push-Type, Cassava, Harvester

Edition: Volume 8 Issue 1, January 2019,

Pages: 1105 - 1113

How to Download this Article?

Type Your Valid Email Address below to Receive the Article PDF Link

Verification Code will appear in 2 Seconds ... Wait