Design of Experiment As a Tool for Optimizing the Batch Condition of Methylene Blue Degradation Using Palladium Based Catalyst
International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064


Downloads: 123 | Views: 293

Research Paper | Chemical Engineering | India | Volume 3 Issue 5, May 2014 | Popularity: 6.3 / 10


     

Design of Experiment As a Tool for Optimizing the Batch Condition of Methylene Blue Degradation Using Palladium Based Catalyst

S. Sivasankaran, Mrinal Ranjan, P. Vairavel


Abstract: Present work deals with the application of Design of Experiment to study the effect of operational parameter on the degradation of methylene blue dye using palladium based catalyst and H2O2. Design of Experiment is used to optimize the degradation of methylene blue. Four factors and two level is used which give 16 experimental set (24). Fit values were found to be good as the experimental values (R=94.1 % and Adj R=91.9). Graphical responses were used to locate the optimum points.


Keywords: Immobilised Pd-CoO, Design of Experiment, Factorial Design, methylene Blue Degradation, Waste-Water Treatment


Edition: Volume 3 Issue 5, May 2014


Pages: 1781 - 1784



Make Sure to Disable the Pop-Up Blocker of Web Browser


Text copied to Clipboard!
S. Sivasankaran, Mrinal Ranjan, P. Vairavel, "Design of Experiment As a Tool for Optimizing the Batch Condition of Methylene Blue Degradation Using Palladium Based Catalyst", International Journal of Science and Research (IJSR), Volume 3 Issue 5, May 2014, pp. 1781-1784, https://www.ijsr.net/getabstract.php?paperid=20147, DOI: https://www.doi.org/10.21275/20147