International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064


Downloads: 108

Research Paper | Chemical Engineering | Saudi Arabia | Volume 4 Issue 4, April 2015


Conversion of used Oil intoLubricatingGrease and Characteristics Evaluation

Salah Eldeen F.Hegazi [2]


Abstract: Lubricant grease is consist of a mixture of a fluid lubricant usually petroleum oil and a thickener (soap) dispersed in the oil. The oil is one of the main sources that threaten public health and pose a significant threat to the environment. The work aims to convert used oil into lubricant grease, since the petroleum prices were increase each year, using used lubricant as base oil is the best solution to produce grease in the low cost at the same time it will decrease the water pollution. Soap thickeners are formed by reacting metallic hydroxide, or alkali, with a fat, fatty acid, or ester. Two type of routes are used in this production that is sodium soap and second route added calcium carbonate and sulfuric acid to the used oil. The reaction temperature, residence time maintained at 120oC, 120minutes and the cooling spent 48 hr. Viscometer was use in this experiment to analyze the quality and performances of grease product to select the best type of soap to produce grease. The different percent of soap are used to know the effect of percent of soap to the viscosity of grease. In the experiment, grease was successfully produced from used lubricant. The best way to produce grease is with sodium soap, where sodium soap is the strongest thickener compare to another thickener. The experiments done in laboratory using different percentage of sodium soap (5 %.10 %, 15 %, 20 % and 25 %) and FTIR apparatus was used a fresh standard grease and the synthesized grease were analyzed. The results shows the grease manufactured using20 % sodium soap is close to the standard grease. Then it is selected in the design scale. Many parameters were analyzed to investigates the quality of the synthesized grease such asdensity, viscosity, composition and dropping point.


Keywords: Grease, Lubricants, Synthesized, Viscosity, Droppingpoint


Edition: Volume 4 Issue 4, April 2015,


Pages: 1894 - 1898


How to Download this Article?

You Need to Register Your Email Address Before You Can Download the Article PDF


How to Cite this Article?

Salah Eldeen F.Hegazi, "Conversion of used Oil intoLubricatingGrease and Characteristics Evaluation", International Journal of Science and Research (IJSR), Volume 4 Issue 4, April 2015, pp. 1894-1898, https://www.ijsr.net/get_abstract.php?paper_id=SUB153505

Similar Articles with Keyword 'Synthesized'

Downloads: 1 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1

Research Paper, Chemical Engineering, India, Volume 12 Issue 7, July 2023

Pages: 1186 - 1189

Synthesis and Evaluation of Boron, Cerium, and Silver Ternary Doped Titanium Dioxide Photocatalysts for Degradation of Ciprofloxacin (CIP) Antibiotic under UV - A Irradiation

Yash Mishra | Dara Kiran | Hari Mahalingam

Share this Article

Downloads: 112

Research Paper, Chemical Engineering, India, Volume 3 Issue 5, May 2014

Pages: 872 - 875

Synthesis of Nanometre Sized Pd-CoO a Transition Bimetal Oxide Using Sonochemical Method and its Characterization

S. Sivasankaran [7] | Mrinal Ranjan [4]

Share this Article
Top