Downloads: 138 | Views: 358
Research Paper | Civil Engineering | Nepal | Volume 7 Issue 3, March 2018 | Rating: 6.6 / 10
Investigation on Dispersion and Mixing Method of PVA Fibers with Cement Paste
Tek Raj Gyawali
Abstract: Flexural strength of fiber paste/mortar greatly depends upon the dispersion and coating condition of fibers. Attempts were made for the dispersing of thin and short Poly-Vinyl Alcohol (PVA) fibers [1] and mixing method of fiber paste. It was found that the dispersing effect of fibers were better in air pressure. The fiber paste mixed in chopper mixer revealed 27 % increase in flexural strength than that mixed in conventional mortar mixer. Pre-dispersed fibers, with air pressure, used in chopper mixer resulted in 34 % increase. Compressive strengths of later two cases were slightly increased in same range than that in mortar mixer.
Keywords: Poly-Vinyl Alcohol PVA fibers, Dispersion, Mixing, Fiber paste, Flexural Strength
Edition: Volume 7 Issue 3, March 2018,
Pages: 822 - 827