Voltage Control Strategy Using SVC with Energy Storage

N. Muthukumar, S. Padhmanabha Iyappan

Abstract: The power generated is usually delivered to the load terminals. But large amount of power is wasted in the form of heat, line losses. In order to balance the sending end power and receiving end power svc is used to overcome the losses. Thus, svc should be added at the dynamic position to improve the bus voltage. Here in my project different generators such as wind, thermal, hydro stations are being connected to the 14 bus system in which the loads are also connected to that bus system. When the loads are on, the voltage gets dipped at the particular bus. So, in that bus the svc should be added to improve the bus voltage. By, this voltage sag, and harmonics can be reduced. The combination of facts devices such as FC-TCR is used to get the better results in maintaining voltage profile.

Keywords: SVC, FC-TCR, Voltage Sag, Real power, Reactive power

How to Cite?: N. Muthukumar, S. Padhmanabha Iyappan, "Voltage Control Strategy Using SVC with Energy Storage", Volume 4 Issue 1, January 2015, International Journal of Science and Research (IJSR), Pages: 1316-1319, https://www.ijsr.net/getabstract.php?paperid=SUB15460, DOI: https://dx.doi.org/10.21275/SUB15460