Effect of End Restraint and Global Slenderness on Buckling Behaviour of CFS Unequal-Leg Lipped Angle Columns
Abstract: Cold-formed steel (CFS) unequal-leg lipped angle columns are thin-walled, monosymmetric members that may exhibit local, global and interaction buckling under axial compression. Their strength is sensitive to the restraint provided at the member ends. This Phase I study develops and validates a nonlinear finite element model of a CFS unequal-leg lipped angle column and uses it to examine the preliminary influence of end restraint. The reference specimen, 1.0-P-1, has leg dimensions of 115 mm and 105 mm, 15 mm return lips, a thickness of 1.0 mm and a length of 700 mm. The steel is represented using an elastic?perfectly plastic model with Young?s modulus of 203,000 MPa, yield strength of 321.08 MPa and Poisson?s ratio of 0.30. The column is modelled in ABAQUS using S4R shell elements. Linear eigenvalue buckling analysis is followed by geometrically nonlinear Static Riks analysis. The finite element peak load of 24.12 kN is compared with the experimental reference value of 23.00 kN, giving a difference of 4.87%. For the 700 mm column, the predicted ultimate loads are 24.12 kN, 18.99 kN and 16.67 kN for fixed-fixed, semi-rigid and pinned-pinned end conditions, respectively. The results indicate a clear reduction in load-carrying capacity as end restraint decreases. The effect of column length/global slenderness is included in the planned parametric programme; however, corresponding numerical results are not reported in the available Phase I material.
Keywords: Cold-formed steel, unequal-leg lipped angle, end restraint, buckling, finite element analysis
How to Cite?: Sruthi P. V., "Effect of End Restraint and Global Slenderness on Buckling Behaviour of CFS Unequal-Leg Lipped Angle Columns", Volume 15 Issue 11, November 2026, International Journal of Science and Research (IJSR), Pages: 480-483, https://www.ijsr.net/getabstract.php?paperid=SR261112112518, DOI: https://dx.doi.org/10.21275/SR261112112518