Experimental Study on the Structural Performance of Lightweight Precast Concrete Slabs Incorporating AAC Block Aggregate
International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064

Experimental Study on the Structural Performance of Lightweight Precast Concrete Slabs Incorporating AAC Block Aggregate

Logesh S, Nandhakumar P

Abstract: Precast concrete slabs offer advantages in quality control, construction speed and installation efficiency; however, their self-weight increases the loads transferred to supporting structural members and complicates transportation and handling. This study investigates the preliminary development of lightweight precast concrete slabs incorporating waste Autoclaved Aerated Concrete (AAC) block aggregate as a partial replacement for natural coarse aggregate. The Phase I work comprised a review of 19 research studies, identification of the research gap, preliminary M40 concrete mix proportioning, manual design of a two-way slab, aggregate testing and an initial finite-element analysis using ANSYS. Five mixtures were proportioned with 0%, 5%, 10%, 15% and 20% AAC replacement by volume of coarse aggregate, at a preliminary water-cement ratio of 0.40. The cement content was 437.1 kg/m3 and the AAC aggregate specific gravity was measured as 0.60, with 15% water absorption. The aggregate impact value was 37%. A 700 mm ? 600 mm ? 100 mm two-way slab was designed using the procedure stated in IS 456:2000 and provided with 8 mm diameter reinforcement at 150 mm centres in both directions. Preliminary calculations indicated adequate flexural, shear and deflection checks under the adopted design assumptions. The initial ANSYS model produced deformation, strain and stress contours; however, the reported peak values are unusually high and require verification of units, material properties, loading, boundary conditions and mesh before engineering interpretation. The results presented are therefore limited to Phase I preparation and preliminary assessment. Cube and slab testing, durability assessment and experimental validation are planned for Phase II.

Keywords: AAC aggregate; lightweight concrete; precast slab; structural behaviour; mix proportioning; ANSYS; recycled construction material

How to Cite?: Logesh S, Nandhakumar P, "Experimental Study on the Structural Performance of Lightweight Precast Concrete Slabs Incorporating AAC Block Aggregate", Volume 15 Issue 11, November 2026, International Journal of Science and Research (IJSR), Pages: 395-400, https://www.ijsr.net/getabstract.php?paperid=SR261109190852, DOI: https://dx.doi.org/10.21275/SR261109190852

Download Citation: APA | MLA | BibTeX | EndNote | RefMan

Share This Research

Help this article reach readers, researchers and professionals.

Share activity is measured for research-engagement analytics. Only verified, unique public shares can support award tie-breaking.

Confirm Your Share

Enter your details so IJSR can confirm this sharing activity.

Your details are used to validate this share and protect the award process from duplicate or false activity.

Download Article PDF


Rate This Article!

Top

Confirm Your Share

Enter your details so IJSR can confirm this sharing activity.

Your details are used to validate this share and protect the award process from duplicate or false activity.