International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064


Downloads: 3 | Views: 170

Masters Thesis | Mechanical Engineering | Indonesia | Volume 10 Issue 12, December 2021 | Popularity: 5.1 / 10


     

Study of the Finite Plain Journal Bearing Considering Cavitation and Roughness Effect

Ganjar Kurnia, Mohammad Tauviqirrahman, Ojo Kurdi, Budi Setyana


Abstract: Many studies have been performed on the impact of surface roughness on journal bearings, but there is still much to learn. Hydrodynamic lubrication has received far more attention than elastohydrodynamic lubrication. The effect of roughness and elastohydrodynamic lubrication on journal bearing cavitation will result in the lubricant and structural. This research will look into the effect of surface roughness on the pressure distribution, vapor volume fraction, and deformation of the journal bearing. The 2-way FSI approach, which is modeled with CFD, will be a helpful technique in this study. The simulation begins with the creation of a model in CAD and the determination of its geometry, meshing, phase definition, boundary conditions definition, and the determination of the Solution Method, the Solution Control, and the Iteration Process.The interaction of the lubrication fluid with the journal bearing's structure will be intriguing to see.It has been confirmed that as roughness increases, the pressure distribution, vapor volume fraction, von Mises stress, and deformation values decrease.


Keywords: roughness, lubrication, bearing


Edition: Volume 10 Issue 12, December 2021


Pages: 590 - 595



Make Sure to Disable the Pop-Up Blocker of Web Browser


Text copied to Clipboard!
Ganjar Kurnia, Mohammad Tauviqirrahman, Ojo Kurdi, Budi Setyana, "Study of the Finite Plain Journal Bearing Considering Cavitation and Roughness Effect", International Journal of Science and Research (IJSR), Volume 10 Issue 12, December 2021, pp. 590-595, https://www.ijsr.net/getabstract.php?paperid=SR211209132543

Similar Articles

Downloads: 1

Research Paper, Mechanical Engineering, India, Volume 10 Issue 6, June 2021

Pages: 1423 - 1428

Improvement in Performance of Heat Exchanger by using Promoters

Saurabh D Vighe, VG Gore

Share this Article

Downloads: 1 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1

Research Paper, Mechanical Engineering, India, Volume 3 Issue 6, June 2014

Pages: 2846 - 2847

Experimental Investigation of Different Material Surface Morphology on Formation of Transfer Layer

M. Basavaraju, Maharudra

Share this Article

Downloads: 2

Research Paper, Mechanical Engineering, Nigeria, Volume 10 Issue 8, August 2021

Pages: 912 - 921

Roughness Factor and its Implications, with Respect to Some Pressure Sensitive Adhesives, A Case Study of 3 Different Adhesives on 5 Mild Steel Plates with Varying Degrees of Roughness at the Surfaces

Ogbu Chika C, Ayogu Vincent, Okpe Bernard

Share this Article

Downloads: 2 | Weekly Hits: ⮙1 | Monthly Hits: ⮙2

Research Paper, Mechanical Engineering, India, Volume 4 Issue 2, February 2015

Pages: 2482 - 2486

Impact of Hard Material Surface Morphology on Friction and Transfer Layer Formation

M. Basavaraju, Shivakumar N V

Share this Article

Downloads: 4 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1

Review Papers, Mechanical Engineering, India, Volume 4 Issue 1, January 2015

Pages: 651 - 653

Evaluation of Fatigue Failure of Crankshaft Work on its Bearing and Crank Pin Analytically and Numerically - A Review

Suryakant Rathod, Qaimi Mudassar

Share this Article
Top