Chronoamperometric Determination of Sulphite Using Gold- Printed Electrode
Abstract: A chronoamperometric method for the determination of sulphite ions has been developed using disposable, screen-printed gold electrodes in presence of some mediators. The used mediators include: potassium hexacyanoferrate (III), hydroxymethylferrocene, 4- (methylamino) phenol sulphate. Calibration curves exhibit a linear relationship between the electrode response and the sulphite concentration over the range from 100 M to 3.00 mM. The correlation coefficients for calibration curve was equal to 0.992. The obtained limit of detection (LOD) was 30 M. The relative standard deviations were equal to or better than 6.96 % (n=5). The interferences of various ions were studied. The used sensors are successfully applied for the determination of sulphite in tap water and agriculture drain water. It was found that the used screen-printed electrodes have its initial response after storage in dry state at room temperature up to eight months.
Keywords: screen-printed electrodes, Chronoamperometry, Sulphite, Mediators, electroanalysis
How to Cite?: M. Khodari, "Chronoamperometric Determination of Sulphite Using Gold- Printed Electrode", Volume 3 Issue 11, November 2014, International Journal of Science and Research (IJSR), Pages: 2278-2281, https://www.ijsr.net/getabstract.php?paperid=OCT141515, DOI: https://dx.doi.org/10.21275/OCT141515