Theoretical Analysis of the Effects of Band Gaps and the Conduction Band Offset of ZnS-CIGS Layers, as Well as Defect Layer Thickness
Abstract: This article deals with solar cells based on CuIn, Ga) Se2 (CIGS) without the toxic cadmium buffer. The software named AFORS-HET is used to simulate the solar cell, n-ZnS/p-CIGS, in the structure n-ZnOAl/i-ZnO/n-ZnS/p-CIGS/Mo. The Ga-content of the CuIn1-xGaxSe2 absorber is x = 0.31 with an energy band gap of 1.19 eV. The optimum conversion efficiency achieved is found to be 26 %. The simulation results have shown that the ZnS buffer layer band gap does not influence the solar cell performance. On the other hand, the cell characteristic parameters were found to be more sensitive to the CIGS layer band gap variation and conduction band offset. We also analyse the effects of the band gap and thickness of the defect layer on the solar cell performance. The optimum band gap and thickness were found to be equal to 1.25 eV and 15 nm respectively.
Keywords: Cu In1-xGax Se2, thin-film solar cell, numerical simulation, AFORS-HET, band offset
How to Cite?: Adama Sylla, Siaka Toure, Jean-Pierre Vilcot, "Theoretical Analysis of the Effects of Band Gaps and the Conduction Band Offset of ZnS-CIGS Layers, as Well as Defect Layer Thickness", Volume 6 Issue 11, November 2017, International Journal of Science and Research (IJSR), Pages: 855-861, https://www.ijsr.net/getabstract.php?paperid=ART20178061, DOI: https://dx.doi.org/10.21275/ART20178061