International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064

Downloads: 146 | Views: 232

Research Paper | Production Engineering | India | Volume 7 Issue 4, April 2018 | Rating: 6.7 / 10

Effect of Friction Stir Welding Process Parameters on Tensile strength of Dissimilar Welded Joint

Nilesh V. Desai | Dr. K. H. Inamdar [6]

Abstract: In the present work, the effect friction stir welding (FSW) process parameters on the mechanical properties of dissimilar friction stir butt welded aluminium (Al) alloy, AA6061-T6 and stainless steel, 304L were investigated. FSW tools having fixed shoulder diameter, pin tip diameter and pin length with tapered cylindrical (TC) pin profile was used for experimental work. The FSW parameters used were, tool rotational speed (rpm), welding speed (mm/min), plunge depth (mm) and tool offset (mm). The ultimate tensile strength (UTS) of the joint is considered as the main criterion of the joint performance. Taguchi method of optimization was used to determine optimum level of parameter and Analysis of Variance (ANOVA) is done in order to determine significance of each parameter. The results showed that the rotational speed has more contribution among all other parameter followed by welding speed.

Keywords: Friction Stir Welding, Dissimilar Metals, Tensile Strength, Analysis of Variance

Edition: Volume 7 Issue 4, April 2018,

Pages: 512 - 515

How to Download this Article?

Type Your Valid Email Address below to Receive the Article PDF Link

Verification Code will appear in 2 Seconds ... Wait