Downloads: 223 | Views: 536 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
M.Tech / M.E / PhD Thesis | Mechanical Engineering | India | Volume 3 Issue 6, June 2014 | Popularity: 6.5 / 10
Fabrication of Oil Separator in Industry
Naveen V Devanagoudar, Dr. Hemanth kumar T R
Abstract: This paper deals with the separation of oil from refinery industries; sugar factories and many small scale industries to find out the better solution for oil recovery from the water surface to produce oil free water. Also deals with the fabrication of mechanical equipment to separate oil from the water. Oil and water separator is mechanical equipment; which is used in the environment pollution control from oil spillage. Oil separator helps in removing the oily from the waste water. By removing the oil from waste water; it becomes free of oil pollution. This is mainly due to oleophilic material used in the oil separator. This oil separator can be used in the effluent treatment plant. This project consists of construction; fabrication details; assembly; working and applications of oil and water separator. The belt speed; oil recovery rate and oil recovery efficiency are the operating parameters of oil separator. The oil recovery rate and the oil recovery efficiency; the two most important parameters displayed the performance of the oil separator.
Keywords: Oleophilic belt, Gear motor, Separator, U-Block bearing, Spur gear
Edition: Volume 3 Issue 6, June 2014
Pages: 56 - 57
Please Disable the Pop-Up Blocker of Web Browser
Verification Code will appear in 2 Seconds ... Wait