To Compensate AC loads using DSTATCOM
Abstract: DSTATCOM is very popular in compensating the linear, nonlinear, balanced and unbalanced loads. Any change in the load affects the DCLV directly. The proper operation of DSTATCOM requires variation of the DCLV within the prescribed limits. This paper presents modified SRF method for real time generation of compensating current for harmonic mitigation and instantaneously active and reactive power compensation. Conventionally, a PI controller is used to maintain the DCLV to the reference value it uses deviation of the capacitor voltage from its reference value as its input. However, the transient response of the conventional PI DCLV is slow. In this paper, a fast-acting DCLV controller based on the energy of a dc-link capacitor is proposed. Mathematical equations are given to compute gains of proposed controller and the detailed simulations of the four cases such as balanced linear, balanced non linear, unbalanced linear, unbalanced nonlinear are carried out on MATLAB/SIMULINK R2009b environment employing a three phase three wire DSTATCOM test system
Keywords: DC-link voltage DCLV, Distribution static compensator DSTATCOM, Point of Common Coupling PCC, Linear, Nonlinear, power factor, power quality PQ, voltage source converter VSC, Proportional-Integral PI control, CHB multilevel inverter, P-Q reference frame theory
How to Cite?: T. Srikanth, "To Compensate AC loads using DSTATCOM", Volume 2 Issue 6, June 2013, International Journal of Science and Research (IJSR), Pages: 409-415, https://www.ijsr.net/getabstract.php?paperid=0201323, DOI: https://dx.doi.org/10.21275/0201323