International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064


Downloads: 121

M.Tech / M.E / PhD Thesis | Electrical Engineering | India | Volume 4 Issue 11, November 2015


Design, Simulation, Implementation and Control of Digital Self-Compensating Method for Integral Cycle Power Control for Welding Application

N. D. Mehta | Dr. D. K. Bhatt


Abstract: The Class of ac power controllers consists of Solid State Power Controller (SSPC) which connects and disconnects the load to the supply according to the required power. Two important voltage control techniques are commonly used for heating power control in ac power controller are Phase Control Switching (PCS) and Integral Cycle Control (ICC). In case that a PCS is used for the resistive load, it can produce higher order harmonics and heavy inrush current while switching on in a cold start. A feedback controlled digital circuit which provides for ICC of power in R-L loads is described. The significant feature of the circuit is that it rapidly and automatically adjusts the firing angle of the Power Semiconductor Device (PSD) to eliminate the undesirable dc component in the current of RL loads. Another notable feature of the circuit is that the initial conduction is started with firing angle = 90 which results in suppressed first peaks in the conduction bursts. Subsequently, the feedback takes over to make the firing angle at equal to the power factor angle, thereby triggering conduction at the current zero in each burst. This scheme of automatic dc offset elimination can be utilized to good advantage in the case of motor loads with rapidly changing power factors. The circuit is simple, inexpensive, and can be assembled easily using commercially available components. In the proposed method, a disadvantage of phase controlled is removed. In this paper authors have reported simulated results, design methodology and implementation of the ICC method for Welding application for R-L load.


Keywords: Burst Firing, Heating Application, Integral Cycle Control ICC, Pulse Burst Modulation PBM Digital Self Compensation


Edition: Volume 4 Issue 11, November 2015,


Pages: 894 - 899


How to Download this Article?

You Need to Register Your Email Address Before You Can Download the Article PDF


How to Cite this Article?

N. D. Mehta, Dr. D. K. Bhatt, "Design, Simulation, Implementation and Control of Digital Self-Compensating Method for Integral Cycle Power Control for Welding Application", International Journal of Science and Research (IJSR), Volume 4 Issue 11, November 2015, pp. 894-899, https://www.ijsr.net/get_abstract.php?paper_id=NOV151310

Similar Articles with Keyword 'Firing'

Downloads: 105

Research Paper, Electrical Engineering, India, Volume 4 Issue 6, June 2015

Pages: 2142 - 2145

AC-AC Conversion with Improved Power factor for Efficient Control of Induction Motor Drive

Sayyad Naimuddin | Dr. D. R. Tutakne | Dr. P.M. Daigawane

Share this Article

Downloads: 120

Research Paper, Electrical Engineering, India, Volume 4 Issue 3, March 2015

Pages: 1031 - 1034

Comparative Analysis of Cascaded H- Bridge Inverter and RV Inverter Topology

Anupama Gupta [2] | Shimi S. L. [2]

Share this Article
Top