International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064


Downloads: 138

Research Paper | Chemical Engineering | China | Volume 7 Issue 3, March 2018


Optimal Performance for both CuO and NiO as Ametal Oxide Nanoparticles Catalyst in the Carbonylation the Glycerol with Carbon Dioxide to Produce Glycerol Carbonate

Jassim Mohamed Hamed AL-Kurdhani [2] | Huajun Wang [2] | Elrasheed Elhaj


Abstract: Two types of metal oxide nanoparticle catalysts Nickel oxide (NiO) and Copper oxide (CuO) are prepared by new method which was quick precipitation (QPT) method at calcination temperature of 400oC for 4h and used for the synthesis of glycerol carbonate GC (C4H6O4) from the direct reaction by the carbonylation of Glycerol GL (C3H8O3) with Carbone Dioxide. The quick precipitation (QPT) was a new and important route for the preparation of nanoparticles catalyst and it was developed by strategy in this work. The effects of performance of (NiO and CuO) nanoparticle catalysts on the conversion of glycerol GL yield of glycerol carbonate, selectivity of glycerol carbonate and Turnover frequency are researched. XRD, FT-IR and SEM are used for the characterization of the prepared metal oxide catalysts. It is found that the best metal oxide nanoparticles catalyst in GL carbonylation reaction is CuO prepared by quick precipitation (QPT) method at calcination temperature of 400oC for 4h. Under 150 oC, 4MPa ( 40 bar. ), 5h, and CuO catalyst amount 37.6 % (based on ratio of glycerol weight) by using 2-pyridinecarbonitrate (C6H4N2) as dehydrating agent and dimethylformamide (DMF) (C3H7NO) as solvent, the glycerol conversion, glycerol carbonate yield and selectivity are 48.64 %, 38.88 %, and 79.94 %, respectively, and the turnover frequency (TOF) value of the catalyst can reach 0.2061h-1, and the catalysts could be easily regenerated by washing with methanol and water after a reaction and then dried at 60 oC overnight after that calcination at 400C for 4h without loss of activity after five recycling times.


Keywords: glycerol, glycerol carbonate, carbon dioxide, metal oxide nanoparticle catalyst, CuO nanoparticle catalyst, carbonylation, La2O3, DMF


Edition: Volume 7 Issue 3, March 2018,


Pages: 1313 - 1322


How to Download this Article?

You Need to Register Your Email Address Before You Can Download the Article PDF


How to Cite this Article?

Jassim Mohamed Hamed AL-Kurdhani, Huajun Wang, Elrasheed Elhaj, "Optimal Performance for both CuO and NiO as Ametal Oxide Nanoparticles Catalyst in the Carbonylation the Glycerol with Carbon Dioxide to Produce Glycerol Carbonate", International Journal of Science and Research (IJSR), Volume 7 Issue 3, March 2018, pp. 1313-1322, https://www.ijsr.net/get_abstract.php?paper_id=ART2018827

Similar Articles with Keyword 'carbon dioxide'

Downloads: 1 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1

Analysis Study Research Paper, Chemical Engineering, Jordan, Volume 11 Issue 12, December 2022

Pages: 570 - 574

Removing CO2 from Industrial Gas Streams by Adsorption into Jordanian Zeolite

Asem Mohammad AL Jarrah [2] | Reyad Ali AL Dwairi

Share this Article

Downloads: 135 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1

Research Paper, Chemical Engineering, India, Volume 7 Issue 8, August 2018

Pages: 1302 - 1306

Characterization and Optimization of Biodiesel from Custard Apple Seed: A Review

Omkar Mhatre | Nishant Matte

Share this Article
Top