International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064


Downloads: 131

Research Paper | Civil Engineering | Indonesia | Volume 5 Issue 9, September 2016


Effect of U-Shape Thickness on Upgrading Capacity Momen of Precast Beam Column Joint Using CFRPS

Harmonis Rante [5] | Rudy Djamaluddin | Herman Parung | Victor Sampebulu


Abstract: Research to investigate the possibility of CFRPS to be a connecting material of beam column joint had been presented [1]. This paper present the effect of U-shape thickness to upgrade the capacity momen of joint. Three specimens were prepared and tested so far. One of them was monolith connection that used as a control specimen (MN). The others were C1S1, joint with one layer of U-shape using one belt and C2S1, joint with two layer of U-shape using one belt. Performance of the three specimens are present in this paper. Results indicated that upgrading twice of CFRPs thickness had increased 2.1 times the momen capacity of joint. The C1S1 reached 15 kN, just 62.5 % of capacity momen respectively to the control specimen, but the C2S1 was 31.5 kN, 131.3 %. . s Beam-column joint, U-shape, U-shape thickness, belt, CFRPs, capacity momen


Keywords: Beam-column joint, U-shape, U-shape thickness, belt, CFRPs, capacity momen


Edition: Volume 5 Issue 9, September 2016,


Pages: 1048 - 1053


How to Download this Article?

You Need to Register Your Email Address Before You Can Download the Article PDF


How to Cite this Article?

Harmonis Rante, Rudy Djamaluddin, Herman Parung, Victor Sampebulu, "Effect of U-Shape Thickness on Upgrading Capacity Momen of Precast Beam Column Joint Using CFRPS", International Journal of Science and Research (IJSR), Volume 5 Issue 9, September 2016, pp. 1048-1053, https://www.ijsr.net/get_abstract.php?paper_id=ART20161760

Similar Articles with Keyword 'belt'

Downloads: 125

M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 6 Issue 5, May 2017

Pages: 2454 - 2457

Analysis of Multistoried Buildings to Study the Influence of Depth of Belt Truss System

Shahana E [7] | Arathi S [8]

Share this Article

Downloads: 153

M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 7 Issue 4, April 2018

Pages: 646 - 648

Study of Outrigger System for High Rise Structures

Mohd Tauseef | Mithun D Gawade | Parmesh P Surnar

Share this Article
Top