International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064


Downloads: 114

Research Paper | Mechanical Engineering | India | Volume 3 Issue 7, July 2014


Finite Element Analysis of Springback of a Sheet Metal in Wipe Bending Process

Amul Biradar | M. D. Deshpande


Abstract: This work presents a study of spring back in wipe bending metal forming process. Spring back is one of the most sensitive features of the sheet metal forming, which occurs due to elastic recovery during unloading. The main purpose of this work is spring back prediction of sheet metal copper alloy and investigation into the causes of the spring back, such as process parameter, geometry of tools etc. In this work the prediction model of spring back in wipe bending process was developed using finite element method code ANSYS APDL 14.0 and an over bend approach is applied to compensate the spring back and the obtained spring back for different process parameters are validated by analytical method.


Keywords: Springback, Plasticity, Wipe bending, over bend approach


Edition: Volume 3 Issue 7, July 2014,


Pages: 852 - 858


How to Download this Article?

You Need to Register Your Email Address Before You Can Download the Article PDF


How to Cite this Article?

Amul Biradar, M. D. Deshpande, "Finite Element Analysis of Springback of a Sheet Metal in Wipe Bending Process", International Journal of Science and Research (IJSR), Volume 3 Issue 7, July 2014, pp. 852-858, https://www.ijsr.net/get_abstract.php?paper_id=7071415

Similar Articles with Keyword 'Springback'

Downloads: 145

Research Paper, Mechanical Engineering, India, Volume 8 Issue 3, March 2019

Pages: 1316 - 1319

Study of Advanced Magnesium Alloys with Improved Bendability for Roll Forming

Vijay Sisarwal

Share this Article

Downloads: 207

Research Paper, Mechanical Engineering, Iraq, Volume 8 Issue 1, January 2019

Pages: 267 - 271

A Study of New Parameters Effect on the Springback of Aluminum Sheets in Plane Strain Bending

Fathi Al-shamma | Hajer M. Issmael

Share this Article
Top