International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Since Year 2012 | Open Access | Fully Refereed | Peer Reviewed

ISSN: 2319-7064




Downloads: 114

Research Paper | Material Science and Engineering | India | Volume 4 Issue 6, June 2015


Assessment of Three Phase Nanocomposite with Electrospun Nanofibers

Sachin Chavan [2] | Dr. S. M. Shendokar [2]


Abstract: Electrospun nylon66 nanofibers of submicron diameter were used to for interlaminar reinforced in glass epoxy composite. Nylon 66 nanofibers (NFs) equivalent to 1 % weight were used to improve the interphase characteristics. This paper presents the comparison of interlaminar strength using SBS ASTM (D 2344) for composite produced by Vacuum Assisted Resin Transfer Molding (VARTM) and by Hand Molding (HM) process. For both methods VARTM and HM, specimen with interlaminar NFs and without NFs was tested. It is observed that interlaminar with NFs improves in both VARTM and HM specimens. Further it was observed that better improvement in interlaminar shear strength (ILSS) is achieved in VARTM than HM.


Keywords: Electrospining, Nylon 66 nanofibers, VARTM, Short beam shear strength and Interlaminar shear strength


Edition: Volume 4 Issue 6, June 2015,


Pages: 563 - 567


How to Cite this Article?

Sachin Chavan, Dr. S. M. Shendokar, "Assessment of Three Phase Nanocomposite with Electrospun Nanofibers", International Journal of Science and Research (IJSR), Volume 4 Issue 6, June 2015, pp. 563-567, https://www.ijsr.net/get_abstract.php?paper_id=SUB154733

How to Share this Article?

Enter Your Email Address






Top