International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Since Year 2012 | Open Access | Fully Refereed | Peer Reviewed

ISSN: 2319-7064




Downloads: 2 | Weekly Hits: ⮙2 | Monthly Hits: ⮙2

Research Paper | Mechatronics | India | Volume 11 Issue 4, April 2022


Design of Real-Time Cobot Planetary Gear System Interfacing with Stepper Motor

B. S. M. Vishwanth | MVS Praveen [2]


Abstract: Now a days the rise of collaborative robots have became emerging technology across the globe. In this project , we have used additive manufacturing where we take 3D CAD files which are planetary gears, sun gears , base gear and we have connected Nema-17 Stepper motor along with A4988 stepper motor driver to control the position of the robot . This robot arm is (roughly) modeled after the UR3 industrial robot at a scale of 80 percent and it is attached between thorax and upper shoulder. It follows the same design principle of putting a motor/reducer actuator unit at each joint and stacking two actuators to produce a 4-axis arm. While the UR3's actuators are hollow torque motors with harmonic drives, this robot uses stepper motors with compound planetary actuators.


Keywords: Arduino UNO, Nema-17 Stepper Motor, A4988 stepper driver, Additive manufacturing, Sun gear, planetary gear


Edition: Volume 11 Issue 4, April 2022,


Pages: 95 - 99

Design of Real-Time Cobot Planetary Gear System Interfacing with Stepper Motor


How to Cite this Article?

B. S. M. Vishwanth, MVS Praveen, "Design of Real-Time Cobot Planetary Gear System Interfacing with Stepper Motor", International Journal of Science and Research (IJSR), https://www.ijsr.net/get_abstract.php?paper_id=SR22329190521, Volume 11 Issue 4, April 2022, 95 - 99, #ijsrnet

How to Share this Article?

Enter Your Email Address




Similar Articles with Keyword 'Motor'

Downloads: 5 | Weekly Hits: ⮙1 | Monthly Hits: ⮙2

Research Paper, Mechatronics, India, Volume 11 Issue 4, April 2022

Pages: 48 - 53

Design and Depiction of 3D Printed Robotic Fish

Jithin V A | V Ravichandra | MVS Praveen [2]

Share this Article

Downloads: 123

M.Tech / M.E / PhD Thesis, Mechatronics, Congo, Volume 7 Issue 8, August 2018

Pages: 999 - 1002

Graphic Technique for Reducing the Shift between the Geometric Axis and the Axis of Rotation of an Industrial Motor Fan Group

Didier Ilunga Mutonkole [2] | Henri Kisanguka Pandakufua [2]

Share this Article


Top