International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064




Downloads: 4 | Views: 23 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1

Case Studies | Mechanical Engineering | Indonesia | Volume 10 Issue 12, December 2021


Bearing Vibration Analysis on Steam Turbine

Risal Abu [2] | Afdal


Abstract: The steam turbine is a rotating machine so it will continue to experience shaft shifts axially and radially which can cause vibrations. Therefore, we need a tool such as monitoring and proximity probe sensors so that vibrations in the turbine when operating can be monitored. One of the tools that can be used to detect the cause of damage to the steam turbine bearings at PT. Supreme Energy Muara Laboh (SEML) is a System One Bently Nevada application that is connected to a turbine bearing to read the spectrum and the waveform. The resulting spectrum and waveform are then analyzed according to the Mobius Institute Standard. Based on the results of the vibration analysis on the steam turbine PT. SEML shows that bearing 1 indicates unbalance, bearing wear and angular misalignment. Bearing 2 has unbalance, bearing wear, parallel misalignment and angular misalignment, bearing 3 indicates parallel misalignment, and bearing 4 indicates unbalance, parallel misalignment and angular misalignment.


Keywords: Turbine, Bearing, Spectrum, Waveform, Unbalance, Bearing Wear, Misalignment


Edition: Volume 10 Issue 12, December 2021,


Pages: 554 - 560


How to Download this Article?

Type Your Email Address below to Download the Article PDF


How to Cite this Article?

Risal Abu, Afdal, "Bearing Vibration Analysis on Steam Turbine", International Journal of Science and Research (IJSR), Volume 10 Issue 12, December 2021, pp. 554-560, https://www.ijsr.net/get_abstract.php?paper_id=SR211207141023



Similar Articles with Keyword 'Turbine'

Downloads: 215 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1

Research Paper, Mechanical Engineering, India, Volume 7 Issue 4, April 2018

Pages: 259 - 261

Self Flowing Generator

Batta Mahesh [3]

Share this Article

Downloads: 0

Research Paper, Mechanical Engineering, India, Volume 11 Issue 6, June 2022

Pages: 817 - 826

Heat Transfer Enhancement through Perforated Fin Made by Al-SiC-MMC and Optimization of Design Parameters using Taguchi DOE Method

A. Kalyan Charan | Dr. R. Uday Kumar | Dr. B. Balunaik

Share this Article



Top