M.Tech / M.E / PhD Thesis | Civil Engineering | India | Volume 5 Issue 7, July 2016
Analysis of Exterior Beam Column Joint Using ANSYS
Anusree Lal
In a multi-storied building, the beam-column joint is one of the most critical regions. Usually the beam-column joint was considered as rigid frames. Various researchers over the past years indicated that the joint is not rigid. Now it is also stated that instead of the failure in beam and column, failure can also occur in joint, hence joint must be considered as a structural member. The Indian standards define a joint as the portion of the column within the depth of the deepest beam that frames into the column. In framed structures the bending moment and shear forces are maximum at the junction area. So, beam column joint is one of the failure zones. Among the beam column joints, the exterior joint is more critical. The exterior beam column joint have been a study for about 30 years since now. Still there are many more to be understood. In the present work a building is designed in STAAD.Pro V8i and an exterior beam column joint is considered. This joint is modelled in NX CAD and imported to ANSYS to analyse it to derive the shear stress and the corresponding deformation.
Keywords: Exterior beam column joint, lateral loads, STAADPro V8i, NX CAD, ANSYS
Edition: Volume 5 Issue 7, July 2016
Pages: 947 - 950
How to Cite this Article?
Anusree Lal, "Analysis of Exterior Beam Column Joint Using ANSYS", International Journal of Science and Research (IJSR), https://www.ijsr.net/search_index_results_paperid.php?id=NOV163602, Volume 5 Issue 7, July 2016, 947 - 950
49 PDF Views | 48 PDF Downloads
Similar Articles with Keyword 'Exterior beam column joint'
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 7, July 2016
Pages: 947 - 950Analysis of Exterior Beam Column Joint Using ANSYS
Anusree Lal
Research Paper, Civil Engineering, India, Volume 6 Issue 12, December 2017
Pages: 1357 - 1366Analytical Study of Eccentric Beam Column Joint
Dattatreya S. Nikam, V. S. Shingade
Similar Articles with Keyword 'lateral loads'
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 7, July 2016
Pages: 1205 - 1209Corrugated Steel Plate Shear Wall with Opening and Stiffener at Opening
Jeena James, Aswathy S Kumar
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 7, July 2016
Pages: 1856 - 1860Effect of Joint Enlargement on the Performance of Exterior Beam-Column Joint
Roshni Roy, Geethu S
Survey Paper, Civil Engineering, India, Volume 4 Issue 5, May 2015
Pages: 485 - 489Analytical Study of Braced Unsymmetrical RCC Building
Nitin N. Shinde, R. M. Phuke
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 4 Issue 7, July 2015
Pages: 1837 - 1843Formulation of an Alternate Light Weight Concrete Mix for Concrete Filled Glass Fiber Reinforced Gypsum (GFRG) Panels
Geethu S, Renjith R
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 7, July 2016
Pages: 947 - 950Analysis of Exterior Beam Column Joint Using ANSYS
Anusree Lal
Similar Articles with Keyword 'STAADPro V8i'
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 7, July 2016
Pages: 947 - 950Analysis of Exterior Beam Column Joint Using ANSYS
Anusree Lal
Comparative Studies, Civil Engineering, India, Volume 8 Issue 3, March 2019
Pages: 1188 - 1193Cost Comparison of RCC Framed and Steel Framed Structure for a Five Storied Building
Dadi Rambabu
Similar Articles with Keyword 'ANSYS'
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 8, August 2016
Pages: 1497 - 1500Influence of Increasing Live Load in Stress on Hyperbolic Paraboloid Shell Roof
Ancy Francis, Ramadass S, Nimya Rose Joshuva
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 4, April 2016
Pages: 1699 - 1701Couple-Field Analysis of Steel Chimney
Linda Ann Mathew
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 7, July 2016
Pages: 1856 - 1860Effect of Joint Enlargement on the Performance of Exterior Beam-Column Joint
Roshni Roy, Geethu S
Research Paper, Civil Engineering, India, Volume 5 Issue 6, June 2016
Pages: 1837 - 1841Bursting Stresses in Beam Column Joint Analyzed and Designed as Per Indian Standards
Ambekar.O.D, Jadhav.H.S
M.Tech / M.E / PhD Thesis, Civil Engineering, India, Volume 5 Issue 7, July 2016
Pages: 1266 - 1269Comparative Study of Three Pole Structure with Steel and FRP using Finite Element Analysis
Sweety S, Aswathy Prakash