Research Paper | Material Science and Engineering | India | Volume 4 Issue 11, November 2015
Development of Alumino-Silicate Investment Shell Moulds to Cast 6061 Al-Alloy
A. Chennakesava Reddy
The investment shell moulds were fabricated with ceramic slurry containing alumino-silicates as filler materials and colloidal silica binder. The investment shell moulds were characterized in terms of hot bending strength and thermal shock. The flow time of slurry solution through the Ford cup is directly proportional to the amount of filler added the liquid binder. The Al2O3 / SiO2 ratio of 60/40 has greater bonding strength than those of ratios of 50/50 and 40/60 respectively. As the Al2O3 content in the filler material, the metastability of the investment shell mould increases leading cracks. The microstructure of 6061 Al-alloy reveals some undissolved Mg2Si.
Keywords: Investment shell moulds, alumino-silicates, hot strength, thermal expansion, metal-mould reaction
Edition: Volume 4 Issue 11, November 2015
Pages: 1183 - 1187
How to Cite this Article?
A. Chennakesava Reddy, "Development of Alumino-Silicate Investment Shell Moulds to Cast 6061 Al-Alloy", International Journal of Science and Research (IJSR), https://www.ijsr.net/search_index_results_paperid.php?id=NOV151412, Volume 4 Issue 11, November 2015, 1183 - 1187
Similar Articles with Keyword 'thermal expansion'
Thermal Expansion Behavior of Al/Magnesia Metal Matrix Composites
Chennakesava R Alavala
Experimental Determination and Analysis of Fracture Toughness of MMC
Shivaraja H B, B S Praveen Kumar