Effect of Process Parameters during Machining of Mild Steel and Titanium
International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
www.ijsr.net | Open Access | Fully Refereed | Peer Reviewed International Journal

ISSN: 2319-7064



Downloads: 109 | Weekly Hits: ⮙2 | Monthly Hits: ⮙2

Research Paper | Production Engineering | India | Volume 8 Issue 10, October 2019

Effect of Process Parameters during Machining of Mild Steel and Titanium

Ramcharan Vuyyala

The measurement of cutting forces and other parameters in metal cutting is essential to estimate the power requirements to machine performance; work piece and tool material selection, tool life, quality of machined surfaces play a major role in this regard. The parameters selected are speed, feed and depth of cut on a lathe machine. In the experiment the lathe tool dynamometer is used to measure cutting force, feed rate and depth of cut. The dynamometer is connected to the data acquisition system. As the tool comes in contact with the work piece the various forces developed are captured. In this experiment four different materials namely mild steel, annealed mild steel, zirconium coated mild steel and titanium materials are selected. In this study single point cutting tools are employed and then major forces on these materials, hardness and surface roughness of the machined surfaces are evaluated. Graph and numerical formulation is done based on variation of speed and feed.

Keywords: LatheDynamometer, Taguchi Sequence, Thermal spary coating, SAE40

Edition: Volume 8 Issue 10, October 2019

Pages: 1079 - 1083

Share this Article

How to Cite this Article?

Ramcharan Vuyyala, "Effect of Process Parameters during Machining of Mild Steel and Titanium", International Journal of Science and Research (IJSR), https://www.ijsr.net/search_index_results_paperid.php?id=ART20202027, Volume 8 Issue 10, October 2019, 1079 - 1083

Enter Your Email Address






Top