Downloads: 128 | Views: 135 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
Research Paper | Automobiles | India | Volume 8 Issue 5, May 2019
Second Law Analysis of Diesel Engine by Using Different Ignition Delay Models
Abstract: A mathematical model is developed for comparing different ignition delay models for compression ignition engine fuelled with the diesel under different operating load. The model developed is single zone zero dimensional model. The different ignition delay models are used to compare the different. Once the heat release rate is modelled the pressure and temperature are predicted for every crank position. The diesel engine is considered as closed system for thermodynamics analysis. The cylinder gases are assumed as ideal gas the different developed ignition delay model is validated against the data obtained by experimentation at laboratory. This study again elaborated how properties of cylinder charge gases varying with the crank angle position. By performing the experimentation on diesel engine, experimental results have been compared with models given by Arrhenious, Wolfer, Watson and Hardenberg. It is found that experimental results are in good agreement with Arrhenious model. Heat transfer to the cylinder wall from cylinder gas has taken into account to find the gross heat release rate. Heat transfer coefficient correlation given by Hohenberg has been used to calculate convective heat transfer. Radiative heat transfer has been neglected. For predictive analysis two functions have been used, one for premixed part and Wiebe function for diffusion part. Different ignition delay correlation to predict start of combustion has been used, i. e. Watson, Wolfer, Arrehenius and Hardenberg and Hase. Simulated curve for ROHR has been tuned with experimental curve for various load conditions to find out the shape parameters of the functions. Correlation for these shape parameters are modified with adjusting coefficients, using the least square curve fitting method. The properties of in-cylinder gas have been calculated by various polynomial equations which are the main function of temperature. The ignition delay correlations are compared.
Keywords: Ignition Delay Model, zero dimensional model, compression ignition engine, thermodynamics analysis, etc
Edition: Volume 8 Issue 5, May 2019,
Pages: 1182 - 1187
Similar Articles with Keyword 'compression ignition engine'
Downloads: 124 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1
Review Papers, Automobiles, Nigeria, Volume 4 Issue 12, December 2015
Pages: 67 - 72Comparative Factors in Spark Ignition (SI) and Compression Ignition (CI) Engines for a Sustainable Technological Economy
Engr. Joseph O. Amaechi | Thomas Chinujinim Godstime | Ochogba Chukwumela Obulor
Downloads: 126
Research Paper, Automobiles, India, Volume 4 Issue 7, July 2015
Pages: 673 - 676Performance and Emission Characteristics of a C.I Engine with Cerium Oxide Nanoparticles as Additive to Diesel
Nithin Samuel | Muhammed Shefeek K