Experimental Investigation the Effect of Weld Parameters on Mechanical and Metallurgical Properties of Dissimilar Joints AA6082?AA6061 in T6 Condition Produced by FSW
International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
www.ijsr.net | Open Access | Fully Refereed | Peer Reviewed International Journal

ISSN: 2319-7064


Amazon Sale


Research Paper | Mechanical Engineering | India | Volume 5 Issue 9, September 2016

Experimental Investigation the Effect of Weld Parameters on Mechanical and Metallurgical Properties of Dissimilar Joints AA6082?AA6061 in T6 Condition Produced by FSW

Vipul Chaudhari, Manish Rahevar

The effect of processing parameters on the mechanical and metallurgical properties of dissimilar joints of AA6082AA6061 produced by friction stir welding was analysed in this study. Different FSW samples were produced by varying the welding speeds of the tool as 50 and 62 mm/min and by varying the alloy positioned on the advancing side of the tool. In all the experiments the rotating speed is fixed at 1600rpm. All the welds were produced perpendicularly to the rolling direction for both the alloys. Microhardness (HV) and tensile tests performed at room temperature were used to evaluate the mechanical properties of the joints. In order to analyse the microstructural evolution of the material, the welds cross-sections were observed optically and SEM observations were made of the fracture surfaces. The corrosion tests of base alloy and welded joints were carried out in 3.5 %NaCl solution at a room temperature. Corrosion current and potential were determined using potentiostatic polarization measurements. It was found that the corrosion rates of welded joints were higher than that of base alloy.

Keywords: FSW, Aluminium alloys AA6082-AA6061, Mechanical and metallurgical characterization

Edition: Volume 5 Issue 9, September 2016

Pages: 1755 - 1760

Share this Article

How to Cite this Article?

Vipul Chaudhari, Manish Rahevar, "Experimental Investigation the Effect of Weld Parameters on Mechanical and Metallurgical Properties of Dissimilar Joints AA6082?AA6061 in T6 Condition Produced by FSW", International Journal of Science and Research (IJSR), https://www.ijsr.net/search_index_results_paperid.php?id=ART20162004, Volume 5 Issue 9, September 2016, 1755 - 1760

65 PDF Views | 60 PDF Downloads

Download Article PDF


Amazon Sale


Similar Articles with Keyword 'FSW'

Case Studies, Mechanical Engineering, India, Volume 9 Issue 1, January 2020

Pages: 1466 - 1469

Investigation on Friction Stir Welding of Dissimilar Aluminium Alloys AA 6061 T6 & Magnesium Alloy AZ31 using Cetrium Powder

K. Rajesh Kumar

Share this Article

Research Paper, Mechanical Engineering, India, Volume 5 Issue 3, March 2016

Pages: 1988 - 1994

Optimization of Process Parameters of Friction Stirs Welding of Aluminum Alloys (6061) Using Taguchi Method

Siva Rama Krishna R, Pavan Kumar T

Share this Article

Research Paper, Mechanical Engineering, India, Volume 5 Issue 9, September 2016

Pages: 1755 - 1760

Experimental Investigation the Effect of Weld Parameters on Mechanical and Metallurgical Properties of Dissimilar Joints AA6082?AA6061 in T6 Condition Produced by FSW

Vipul Chaudhari, Manish Rahevar

Share this Article

Research Paper, Mechanical Engineering, India, Volume 2 Issue 3, March 2013

Pages: 375 - 379

A Review of Friction Stir Welding Process and its Variables

M. S. Srinivasa Rao, Kode Jaya Prakash, B. V. R. Ravi Kumar

Share this Article

Research Paper, Mechanical Engineering, India, Volume 4 Issue 10, October 2015

Pages: 44 - 50

Analytical Modeling & Simulation of Friction Stir Welding Process

G. Reddy Basha, K. Ashok Kumar

Share this Article
Top