International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Open Access | Fully Refereed | Peer Reviewed

ISSN: 2319-7064


Downloads: 91

Research Paper | Production Engineering | India | Volume 5 Issue 8, August 2016


Formability Limit Diagrams of Cold Deep Drawing Process for Nickel 201 Cylindrical Cups

G. Devendar, A. Chennakesava Reddy


Abstract: In this present work, a statistical approach based on Taguchi Techniques and finite element analysis were adopted to determine the formability of cylindrical cup from nickel 201 using cold deep drawing process. The process parameters were punch velocity, coefficient of friction, strain rate and displacement per step. The formability of deep drawn cylindrical cups were also constructed. The results obtained from the finite element software namely D-FORM were validated experimentally. The strain rate by itself has a substantial effect on the effective stress, surface expansion ratio, damage and height of the cylindrical cups drawn. The extending deformation of grain boundary micro-voids towards the tensile direction would contribute more to the total elongation, as the strain rate increases, this should be the most possible reason for the increase of surface expansion ratio with an increase in the strain-rate. The plastic deformation increases with the extended yield strength, consequently the damage decreases.


Keywords: Nickel 201, cold deep drawing, punch velocity, coefficient of friction, strain rate, cylindrical cups, formability


Edition: Volume 5 Issue 8, August 2016,


Pages: 1591 - 1598


How to Cite this Article?

G. Devendar, A. Chennakesava Reddy, "Formability Limit Diagrams of Cold Deep Drawing Process for Nickel 201 Cylindrical Cups", International Journal of Science and Research (IJSR), https://www.ijsr.net/get_abstract.php?paper_id=ART20161216, Volume 5 Issue 8, August 2016, 1591 - 1598

How to Share this Article?

Enter Your Email Address


Similar Articles with Keyword 'cold'

Downloads: 92

M.Tech / M.E / PhD Thesis, Production Engineering, India, Volume 3 Issue 7, July 2014

Pages: 808 - 812

Comparison of Three Remedial Alternative Solutions' and Selection of Best for Alternative Design of Pressure Board UVSL

Kapil Deshmukh, Dr. S. P. Untawale

Share this Article

Downloads: 122

Research Paper, Production Engineering, India, Volume 4 Issue 8, August 2015

Pages: 835 - 838

Minimization of Plastic Injection Molding Defects Using Hot Feeding System

Dhananjay Singh, Pradeshi Ram

Share this Article

Similar Articles with Keyword 'coefficient'

Downloads: 97

Research Paper, Production Engineering, India, Volume 3 Issue 6, June 2014

Pages: 2153 - 2156

Formability Analysis of Deep drawing Process by Finite Element Simulation

Anup S. Atal, M. T. Shete

Share this Article

Downloads: 120

Research Paper, Production Engineering, India, Volume 6 Issue 11, November 2017

Pages: 115 - 123

Parametric Optimization of Rotary Electro-Discharge Machining of Oil Hardened Non Shrinkage Steel Material with Sensitivity Analysis

Rahul Shivajirao Desai, M. V. Kavade

Share this Article

Similar Articles with Keyword 'friction'

Downloads: 97

Research Paper, Production Engineering, India, Volume 3 Issue 6, June 2014

Pages: 2153 - 2156

Formability Analysis of Deep drawing Process by Finite Element Simulation

Anup S. Atal, M. T. Shete

Share this Article

Downloads: 145

Research Paper, Production Engineering, India, Volume 7 Issue 4, April 2018

Pages: 512 - 515

Effect of Friction Stir Welding Process Parameters on Tensile strength of Dissimilar Welded Joint

Nilesh V. Desai, Dr. K. H. Inamdar

Share this Article

Similar Articles with Keyword 'rate'

Downloads: 95

Research Paper, Production Engineering, India, Volume 6 Issue 3, March 2017

Pages: 2329 - 2335

Effect and Optimization of Process Parameters using Taguchi Method in WEDM for AISI M42 HSS Material

Joshi Guruprasad R., Dr. A. N. Chapgaon

Share this Article

Downloads: 97

Research Paper, Production Engineering, India, Volume 3 Issue 6, June 2014

Pages: 2153 - 2156

Formability Analysis of Deep drawing Process by Finite Element Simulation

Anup S. Atal, M. T. Shete

Share this Article

Similar Articles with Keyword 'cylindrical'

Downloads: 145

Research Paper, Production Engineering, India, Volume 7 Issue 4, April 2018

Pages: 512 - 515

Effect of Friction Stir Welding Process Parameters on Tensile strength of Dissimilar Welded Joint

Nilesh V. Desai, Dr. K. H. Inamdar

Share this Article

Downloads: 155

Research Paper, Production Engineering, India, Volume 8 Issue 11, November 2019

Pages: 56 - 60

Parametric Optimization of Process Parameters of EDM for SS304 by Using Design of Experiments Method

Narendra Kumar Patel, Harshwardhan Singh Rathore

Share this Article
Top