Analysis of Load Test Fixture Acting Under Static Loading Condition
International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
www.ijsr.net | Open Access | Fully Refereed | Peer Reviewed International Journal

ISSN: 2319-7064



Downloads: 107

Research Paper | Production Engineering | India | Volume 3 Issue 6, June 2014

Analysis of Load Test Fixture Acting Under Static Loading Condition

Vineet V. Gosavi, Dr. K. H. Inamdar

Structural items include various fabricated and machined items. Various types of fabrication processes like welding; bending; riveting etc. and machining processes like grinding; milling and turning are carried out to produce different components. When these components are assembled to have final product; lots of problems are faced. Problems like crack formation; wear of components; failure of component in service etc. arise. So to avoid this; Root-Cause Analysis of these defects is carried out and production process is modified as per the results of analysis. Root-Cause Analysis consists of why-why analysis; process sheets preparation; design of jigs and fixtures if necessary and design of inspection gauges and templates for inspection purpose. Load test fixture is used to check the sustainability of the component under given operating load. If cracks or any defects are found then root-cause analysis of those defects is carried out.

Keywords: Root-Cause Analysis RCA, 5-Why Analysis, Cause and Effect Diagram, Critical to Quality CTQ, Finite Element Analysis FEM

Edition: Volume 3 Issue 6, June 2014

Pages: 2637 - 2641

Share this Article

How to Cite this Article?

Vineet V. Gosavi, Dr. K. H. Inamdar, "Analysis of Load Test Fixture Acting Under Static Loading Condition", International Journal of Science and Research (IJSR), https://www.ijsr.net/search_index_results_paperid.php?id=2014843, Volume 3 Issue 6, June 2014, 2637 - 2641

Enter Your Email Address




Similar Articles with Keyword 'Analysis'

Downloads: 91 | Weekly Hits: ⮙3 | Monthly Hits: ⮙7

M.Tech / M.E / PhD Thesis, Production Engineering, India, Volume 3 Issue 7, July 2014

Pages: 808 - 812

Comparison of Three Remedial Alternative Solutions' and Selection of Best for Alternative Design of Pressure Board UVSL

Kapil Deshmukh, Dr. S. P. Untawale

Share this Article

Downloads: 91

Research Paper, Production Engineering, India, Volume 3 Issue 9, September 2014

Pages: 580 - 583

Economical Methods to Reduce Time Required for Product Quality Inspection in Small Scale Industries

Siddharth Sancheti, Dhanashree Kadulkar, Varun Naik

Share this Article



Top