International Journal of Science and Research (IJSR)

International Journal of Science and Research (IJSR)
Call for Papers | Open Access | Double Blind Peer Reviewed

ISSN: 2319-7064

Downloads: 119 | Views: 134

M.Tech / M.E / PhD Thesis | Mechanical Engineering | India | Volume 3 Issue 5, May 2014

Molten Metal Flow Analysis of Housing Component

Bodhayana M. R. | N Ramesha

Abstract: Die casting is a versatile manufacturing technique in which molten metal is poured into die. The die consists of core and cavity; an impression is formed when these core and cavity are closed together. This impression forms the shape and size of the component. The main challenge in die casting is design and manufacturing of die. Integration of design and analysis yields to better results. Die casting is often encountered with many problems; few of such problems are blowholes; improper filling; scratch marks; weld lines; cracks; cold shut; porosity; blisters; ejector pin marks; etc. usually these defects are caused due to improper design of dies; or due to incorrect parameters such as injection pressure; cycle time; cooling circuits and other such parameters. In order to eliminate such defects a set of analysis has to be carried to ensure that design and other parameters are safe and efficient. Through analysis is carried to understand how the molten metal behaves inside the dies once it is injected; a clear picture about how the molten metal gets solidified is obtained during analysis. Any defects if present can be studied by analyzing the results of analysis. In this paper pro cast analysis software is used for analysis purpose; the flow of molten metal inside the impression was studied and changes to be made to the design were analyzed. Behavior of molten metal at different stages of time such as temperature variations; pressure variations is studied. Different graphs are plotted to study the behavior inside the dies.

Keywords: Flow simulation, Solidification, Aluminum die casting, Pressure, Temperature analysis, Die casting, Pro-cast

Edition: Volume 3 Issue 5, May 2014,

Pages: 1636 - 1639

How to Download this Article?

Type Your Email Address below to Download the Article PDF

How to Cite this Article?

Bodhayana M. R., N Ramesha, "Molten Metal Flow Analysis of Housing Component", International Journal of Science and Research (IJSR), Volume 3 Issue 5, May 2014, pp. 1636-1639,

Similar Articles with Keyword 'Pressure'

Downloads: 184 | Weekly Hits: ⮙1 | Monthly Hits: ⮙1

Survey Paper, Mechanical Engineering, India, Volume 8 Issue 6, June 2019

Pages: 2320 - 2324

A Review Paper on Electro Chemical Discharge Machining Technique

Rajeev Sharma [3]

Share this Article

Downloads: 232

M.Tech / M.E / PhD Thesis, Mechanical Engineering, India, Volume 7 Issue 5, May 2018

Pages: 44 - 47

Review Paper on Experimental Investigation on Vortex Tube Refrigeration System

Abhinav Giri

Share this Article